Polyester TGIC-Free Powder Paint
Polyester TGIC-Free coatings have excellent weatherability combined
with excellent mechanical properties. Charging characteristics of
these powders are excellent, making hard to coat parts much easier.
Additionally, these products are TGIC Free, and have very fast
curing rates, making them excellent coatings for temperature
sensitive or heavy gauge substrates.
Typical application of polyester TGIC-Free coatings includes usage
on patio furniture, sporting gear, fencing, automotive trim, door
and window frames, playground equipment and tire rims.
1. Available in standard curing and lower temperature curing
2. Available in multi-colors, different gloss level such as high
gloss ( above 90°), flat gloss( 70-80°), semi gloss ( 10-60°),
matt( below 10°), particular color and gloss is made according to
3. Available in various kinds of art textures, such as sandy,
wrinkle, lanose grain, hammer tone, metallic effect etc.
Specific gravity: 1.4~1.8g/cm3 (varied with different color and gloss)
Particle size: average 10~38um, proportion 10~84um > 90%, it can
be adjusted if special requirement is put forward to us in advance.
Standard type: 190°c/15 minutes
Or 160°c/20 minutes, 200°c/10 minutes if customer require
The overall quality of the coating system is largely dependent on
the type and quality of the pre-treatment. The recommended types of
pre-treatment for the most frequently used substrates are:
Zinc coated steel
Zinc phosphate or chromate conversion
Electrostatic spray gun
Electrostatic Fluidized bed
Test standard and Method
GB/T 1732 -1993
GB/T 9286 - 1998
Salt spray resistance
Heat & humidity resistance
>500 Hours,film gloss slightly lose
Note: 1. Above test are using 0.30mm thickness degreased, rust
removed cold rolling steel plate, film thickness is 60-80um.
2. Film performance may slightly decrease with gloss decrease.
Carton packing with liner of double polyethylene bags, Net weight
Storage and shippment
The product must be stored in ventilated, dry and clean room with
temperature below 25°c Keep it away from fire, heat,and direct
sunlight. Outdoor stacking is prohibited. Avoid rains and exposure
to sunshine during shipment. The period of validity is 6 month
under above condition. Expired products can not be used unless
re-testing result meets the utilization standards.
Health and safety
There are no hazardous ingredients contained. Wearing anti-dust
mask and goggles to avoid inhalation of dust. Try best to avoid
longtime contact with powder. The coating adhesive to the skin can
be washed with soap.